An auto door panel mould is a type of tool used in the manufacturing process of automobile door panels. It is used to shape and form the door panel’s various components, such as the armrest, speaker grille, and power window switch panel.
Auto door panel moulds are typically made from high-strength materials such as steel or aluminum and are designed to withstand the high pressures and temperatures involved in the manufacturing process. The mould is used to shape the raw materials, such as plastic or fiberglass, into the desired form and size of the door panel.
The production of auto door panels using moulds allows for consistent quality and efficiency in the manufacturing process. The use of moulds also helps to reduce the time and cost associated with producing each door panel.
Auto Door Panel Mould
The car door panel mould is located on the inner side of the car door and is installed in four positions on the front, rear, left and right of the car door. It is an important part of the car interior parts. The door panel of the car is an appearance part, and no welding line is allowed. When injection moulding, it is necessary to adjust the welding line to the non-appearance area or eliminate the welding line. Leiao‘s door panel mould adopts a 3-point sequential needle valve hot runner system, which is controlled by an oil cylinder or a cylinder. The opening and closing of 3 hot nozzle heads to achieve the injection moulding effect without welding lines. The selection of the glue inlet position is mainly determined by the mould flow analysis, and the type of glue mouth is mainly used for large nozzles and diving. But one thing needs to be noted: the glue feeding position is in the non-appearance position or the position that is not easy to see after the door panel is assembled, such as the glue opening at the bottom of the door panel mould.
Post time: Jan-02-2024