The hanger mold is an important factor in the hanger shape and quality. The hanger mold in the mold classification is almost all classified as the injection mold classification, mainly related to the processing and use of the mold.Specifically, the heat-melted material is injected into the hanger mold chamber at high temperature, and after cooling and curing, to get the hanger forming product.Leiao molding coat hanger injection molding process can be roughly divided into the following six stages of “mold-injection-pressure preservation-cooling-open mold-plastic coat hanger out”, the above process is repeated, can be continuously produced products.The hanger mold can be made into a multi-chamber mold, a mold can be out of multiple hanger products. The following eight-hanger die mold made by Leiao.
The material selection of hanger mold mainly considers the thermal strength, thermal stability of steel and the hardness of steel itself. Commonused mold materials:
45 # steel: No.45 steel is carbon structure steel, hardness is not high easy to cut, the corresponding processing cost is lower than other steel. General production is not very high, production requirements, clothes rack quality requirements are not very high recommended to choose.
P20: pre-hard plastic die steel. Suitable for the long-term production of high-quality plastic molds. This steel has good cutting ability and general polishing.
718:718 Die steel use is the same as P20 type mold steel, but due to better quenability, better performance, can make large size, good plastic mold forming parts.
H13: H13 steel is hot mold steel. Before processing, the vacuum quenching hardness is more than 50.
Leiao is good at making various styles of hanger molds. If there is demand, welcome to visit the factory and discuss cooperation!
Post time: Aug-29-2023