Products
-
16 / 24 / 48 Multi Cavity Bottle Cap Plastic Mould Pet Cap Cover Mold Flip Oil Bottle Mould Shampoo Bottle Milk Bottle Lid Household Packaging Mould
Taizhou Leiao Molding Co., Ltd. can produce the bottle cap mold within 64 cavity. According to the customer’s requirements, the hot flow channel or the cold flow channel structure can be selected. The hot flow channel of the bottle cap mold is designed with commonly used PE (polyene) free hot flow channel, the spring type electric heating ring and beryllium copper tube are heated, the hot flow nozzle is separately temperature controlled, the mold is produced under automatic conditions, without the frequent operation of employees, to reduce the labor force of workers. The key parts of the mold (core, cavity, slider) use German mirror anti-rust steel, and through the hot place (HRC 45), to ensure the service life and bottle quality of the mold. And the use of turning machining center processing, to ensure the processing quality of parts, to achieve mutual matching. Stable process, good use effect, can be comparable with the imported mold.
-
OEM Plastic Electric Kettle Injection Mold for Household Appliance
abs moulding molding manufacturer making injection plastic mold products electric kettle mould
-
Factory Make Injection Plastic School Stool Mould
Plastic stool mold is very widely used in daily life, the production of the stool is basically used in every household, strong structure and materials to make the stool is not easy to crack.
After Leiao makes the stool mold product, we will check the superposition effect of the chair, such as whether the perpendicularity is straight, overlapping 15 layers. Also consider the possibility of deformation between the stool frame and four legs, generally we test with 100 kilograms of material instead of artificial, 24 hours stacked, the deformation distance between the four legs can not exceed 3 cm for qualified. Whether the classification line is sharp, the classification line on the stool is very rough is dangerous, especially for women and children’s skin is easy to scratch, and sharp edges must be avoided. -
Plastic Moulding Manufacture Customize Safety Helmet Mould OEM Custom Parts Mold
Helmets are divided into full helmets, 3/4 helmets, half helmets, assembled helmets, etc. The main material of the helmet is ABS resin material, which is an engineering plastic with strong impact ability and good dimensional stability.
-
OEM Auto Plastic Injection S136 Mould for Car Wheel Hubcap
For the large size of the left and right rear hubcap products of the car, Injection molding is difficult to fill the full actual production difficulties, By performing the CAE optimization analysis, To determine the hot flow channel injection molding scheme, The 6 point hot flow nozzle direct pouring molding scheme of the product, And targeted combined with the production of actual equipment, The CAE analysis results of the 6-point pouring scheme are analyzed quantitatively, Avoid the uncertain manufacturing risk caused by manufacturing experience alone; Using the UG mold design function, Two family modes of one mode and two holes are designed, Innovative design of cylinder T-groove variable pumping core slider mechanism and cylinder + thimble plate complete release mechanism, Save the mold design space and the amount of mold materials used, The old design is reasonable, Stable and reliable, and It provides a useful reference for the mold design and production of similar plastic parts.
-
Blow plastic door plate mold
Taizhou Huangyan Leiao molding Co., Ltd. is specialized in manufacturing and processing of medical equipment molds. Needle die, test tube die, PET bottle embryo die / cap die, PET blow die / PP bottle die, auto interior and exterior trim die, daily die, daily die, plastic bucket die / plastic tank die / plastic pot die, plastic cup die / plastic basin die / plastic box die, plastic box die / finishing box mold, plastic tray die / fruit tray die / injection mold, thin-wall die, disposable tableware die, PET / PETG / PP / PC plastic bottle / PC plastic bottle / plastic tank, HEPE / LDPE / PVC plastic bucket, PS / AS / ABS plastic products, fresh box, sealed tank, space cup. Plastic bottle cap, plastic daily necessities processing, food and beverage packaging bottles, cosmetics bottle box processing, daily chemical bottle packaging, automatic bottle blowing machine, semi-automatic plastic blowing machine, electric tank sealing machine and other products, with a complete and scientific quality management system.
-
Plastic Injection Drawer Mold Case Storage Cabinet Locker Container Mould
Storage cabinet is generally divided into family storage cabinet and business storage cabinet, mainly used to facilitate people’s use, store different items, classify. And for the family or dormitory with small space, it is an article, can make full use of the space to accommodate more life items, but also can decorate people’s home environment.
-
Plastic Injection Car Wheel Hubcap Mould
For the large size of the left and right rear hubcap products of the car, Injection molding is difficult to fill the full actual production difficulties, By performing the CAE optimization analysis, To determine the hot flow channel injection molding scheme, The 6 point hot flow nozzle direct pouring molding scheme of the product, And targeted combined with the production of actual equipment, The CAE analysis results of the 6-point pouring scheme are analyzed quantitatively, Avoid the uncertain manufacturing risk caused by manufacturing experience alone; Using the UG mold design function, Two family modes of one mode and two holes are designed, Innovative design of cylinder T-groove variable pumping core slider mechanism and cylinder + thimble plate complete release mechanism, Save the mold design space and the amount of mold materials used, The old design is reasonable, Stable and reliable, and It provides a useful reference for the mold design and production of similar plastic parts.
-
Technology Make Car Mold of Plastic Car Steering Wheel Mold
The steering wheel is a composite material made of metal as skeleton material and plastic by injection.
（1）Raw materials and the typical formula. Polypropylene modified with thermoplastic elastomer SBS can be used as special material for automobile steering wheel.
(2) Main production equipment. A screw right-angle injection machine with an injection capacity of 2000g, with a locking force of about 4000 kN. The injection capacity of 2000g can meet the needs of various automobile steering wheel production. 9 The choice of screw type is to ensure the plastic plasticizer and uniform coloring.
(3) Preparation process.The metal frame of the steering wheel is made for the metal processing process, which is omitted here. The hygroscopicity of the modified polypropylene automobile steering wheel is not high (less than 0.02%), but in order to ensure quality stability, it is still advisable to dry at 90 ~ 100 ^ for 3-4h in advance. The steering wheel is shaped by injection. Because this product has a metal skeleton, the plastic in the mold flow channel is longer, the plastic cooling speed is faster, so the injection speed should be slightly faster (40~80. ^/8). The injection pressure should be appropriate. When the product is too large, it is easy to overflow edge, and the internal residual stress is large; the thick wall is easy to shrink and dent, so about 49MPa is generally selected. The temperature of the injection material is slightly lower than that of the pure PP powder, because the processing temperature of SBS is lower (160~190)
-
Plastic Mould for Plastic Shell Parts of Safety Helmet Injection Molding Customized ABS/Plastic Cover of Safety Helmet Injection Mold
The helmet products are divided into two categories according to the general operation type (Y type) helmet and the special operation type (T type) helmet. Among them, the T category is divided into five categories:
T1 is suitable for workplaces with fire sources;
T2 is suitable for underground mines, tunnels, underground works, harvesting and other work sites;
T3 is suitable for flammable and explosive workplaces;
T4 (insulation) is suitable for live working places;
T5 (low temperature) category is suitable for use in low temperature applications.
-
Plastic Fruit Vegetable Storage Crate Injection Mold
The main material of the material turnover basket is PE material, through the injection molding process integrated plastic products, the overall durable, with strong tenacity, throw is not easy to damage, is widely used, common in all walks of life transportation turnover, packaging damage prevention, storage and storage, production line classification and so on. Plastic turnover box series mold (including plastic beer box mold, plastic water tank mold, plastic fruit box mold, packing box mold, finishing box mold, plastic box mold, sealed box mold, glove box mold, storage box mold, etc.) commonly used mold steel: 45 #, 40 Cr, P20,2738,2316,718, NAK 80, S136 and so on.
-
High Precision Injection Molding Plastic Parts PP PE Shopping Basket Mould
Plastic basket mold is very common household mold, very widely used, mold using high speed lathe processing, high precision, long life, make the basket can be used in agriculture, commercial, household, plastic basket is very common in daily life, such as wash vegetables basket, dirty basket, shopping basket and so on have plastic material, all belong to the plastic basket. We can see the universality of plastic basket application.
Commonly used plastic basket size has 1L/1.5L/2L/3L/5L/6L, Leiao company do plastic basket mold is becoming more and more popular with the market, so far has made thousands of pairs of plastic basket mold, through our company mold production process, not only can improve the life of the mold, but also can increase the plastic basket mold injection surface gloss of the product, at the same time will not appear flying / wool. Our company is also gradually summarized from the beginning of the continuous failure of the experience, and constantly master the plastic mold production technology.